Setup Tru-Test S3 Weigh Scale (app)

Setup Tru-Test S3 Weigh Scale (app)

The Tru-Test S3 is a bluetooth low energy (BLE) Weight Scale device, that can output weight data to the StockMate App on Android Devices. As the S3 can send weight only, a separate device will be required for sending EID information to StockMate. Refer to the Hardware Connections Overview (app) for further information.

Before use, check that the Weigh Scale indicator has the latest firmware installed. Contact the manufacturer for detail.

Bluetooth: Weight Only

Device Settings

Tablet

  1. On the Android Tablet, pair the Tru-Test Weigh Scale indicator. A pairing code may be asked for, usually 0000 or 1234.

Typical steps for pairing a device to the tablet; Settings > Connections > Bluetooth > Scan. Steps may vary on some Android devices.

            

StockMate Settings

  1. From the StockMate Dashboard, tap More (three dots at top-right), Preferences.

  2. Tap Config.


  3. Select options so the Hardware Connections screen will look like the screenshot below (Paired Device: select the device paired in step 1). Tap Save & Test to establish the connection.
    When the connection has been successfully made, the Save & Test buttons will be green as well as the Scales BT button. Do not proceed unless this is the case.

  1. Send a stable weight to test the device.

Using In a Scan Session

To use in a scan session, from the Session Setup screen ensure Hardware Connections is ticked on. Refer to Create New Scan Session – Session Setup (app) for further details.
To check Hardware connections, tap Config, and edit if required.
An EID reader will also be required to scan animals into StockMate. See Hardware Connections Overview (app) for more information.

    • Related Articles

    • Setup Tru-Test XR5000, ID5000, JR5000 Weigh Scale (app)

      The Tru-Test XR5000, ID5000 and JR5000 can be used to output data from the Weigh Scale indicator to StockMate via an Android Tablet. The settings on all three Weigh Scale indicators are identical. Before use, check that the Weigh Scale indicator has ...

    • Setup Tru-Test XR3000 Weigh Scale (and EID Reader)

      The TruTest XR3000 Weigh Scale indicator can be used with a Bluetooth enabled EID reader. The process involves: Pairing the EID reader to the Weigh Scale indicator so that the Weigh Scale indicator is holding EID and weight information. Connecting ...

    • Setup Gallagher TSi 2 Weigh Scale (app)

      The Gallagher TSi 2 weigh scale indicator can connect to StockMate: via Bluetooth (requires a Bluetooth dongle). Although the Gallagher TSi 2 weigh scale indicator has embedded Bluetooth and WiFi capacity, the product does not allow for EID and ...

    • Setup Ruddweigh 800 Weigh Scale (app)

      The Ruddweigh 800 Weigh Scale indicator can be used with StockMate via Bluetooth (Bluetooth adaptor required). Connecting via Bluetooth Device Settings Bluetooth Adaptor Plug the Bluetooth adaptor into Port 2 on the Ruddweigh 800 Weigh Scale ...

    • Setup Gallagher W610 v2 & W810 v2 Weigh Scale (app)

      The Gallagher W610 v2 and W810 v2 can be used to send either: An EID and Weight to StockMate in Data Logger Output mode or; Weight only to StockMate in Ruddweigh mode. The W610 v2 and W810 v2 can be connected to StockMate using a: USB serial Cable; ...