If a device is not listed, please contact Elynx for assistance.

EID Readers

1. Allflex RS420 EID Reader can be connected to StockMate:
   
1. Via Bluetooth to send EID information. Refer to the Setup Allflex RS420 EID Reader (app) for detailed instructions or;
   
2. Via a Weigh Scale Indicator. Refer to Setup Allflex RS420 EID Reader via Weigh Scale (app)
   for details.
2. Gallagher HR0 EID Reader can be connected to StockMate via Bluetooth to send EID information.
   
3. Tru-Test SRS2, SRS2i, XRS2i Stick Readers can be connected to StockMate to send EID information:
   
1. Via Bluetooth, refer to Setup Tru-Test SRS2, SRS2i, XRS2i Stick Reader (app).
   
2. Via Weigh Scale Indicator, refer to Setup Tru-Test XR5000, ID5000, JR5000 Weigh Scale (app).
   
4. UTAGS TagScan R1 & R2 can be connected to StockMate via Bluetooth to send EID and/or UHF Visual Tag information.
   
5. YardsTech Stick Reader can be connected to StockMate, using the YardsTech by FarmXL application, to send EID information:
1. Via Bluetooth
   
2. Via the Yards Techs devices own WiFi Hotspot / Access point
   
3. Via connection to an existing WiFi network.
   

Weigh Scale Indicators

1. Gallagher TSi 2 can be connected to StockMate via Bluetooth (dongle required) to transfer EID and weight information.
   
2. Gallagher TW-1, TWR-1, TW-3, and TWR-5 can be connected to StockMate via Bluetooth to:
   
1. Transfer EID and weight information using an EID Reader and the Weigh Scale Indicator or;
   
2. Transfer weight information only using the Weigh Scale Indicator or;
   
3. Transfer EID information only using an EID reader and the Weigh Scale Indicator (applicable to TWR-1 and TWR-5 only).
   
3. Gallagher W-0 can be connected to StockMate via Bluetooth Low Energy to send Weight data only.
   
4. Gallagher W610 v2 & W810 v2 can be connected to StockMate via Bluetooth (dongle required) or USB Serial Cable. They can be used to:
   
1. Transfer an EID and Weight to StockMate in Data Logger Output mode or;
   
2. Transfer Weight only to StockMate in Ruddweigh mode.
   
5. Rinstrum X320 can be used along with a Bluetooth enabled EID Reader. Detailed instruction on connecting the EID Reader to the Tablet and the Weigh Scale Indicator are contained in the article.
   
6. Ruddweigh 800 can be connected to StockMate via Bluetooth (dongle required) to send weight information.
   
7. Tru-Test S3 can be connected to StockMate via Bluetooth Low Energy to send weight data only.
   
8. Tru-Test XR3000 can be used with a Bluetooth enabled EID Reader to capture EID and weight information and transfer these to StockMate via Bluetooth, Wi-fi or USB serial cable.
   
9. Tru-Test XR5000, ID5000, and JR5000 can be used to output data from the Weigh Scale Indicator to StockMate via an Android Tablet using Bluetooth or USB serial cable.
   
1. Transfer EID and weight information when the EID reader is connected via weight scales.
   
2. Transfer a continuous weight using the EziWeigh mode.
   
10. YardsTech Scales can be connected to StockMate, using the YardsTech by FarmXL application, to send weight information:
    
1. Via Bluetooth
   
2. Via the Yards Techs devices own WiFi Hotspot / Access point
   
3. Via connection to an existing WiFi network.

Automatic Gates

1. Direct Relay Control Autodrafters relay cards can be configured and installed to allow existing Autodrafters to function with StockMate.
   
2. TePari Taurus Auto Sorting Crush and Racewell Auto Drafter when connected to StockMate, in conjunction with weigh scales, can be used automate crush and drafting gate operation.
   
3. Thompson Longhorn can be used with the StockMate app to operate automatic gates.